论文
| 序号 | 文章标题 | 期刊 |
|---|---|---|
| 1 | 长期时效对两种镍基高温合金组织稳定性的影响 | 热加工工艺 |
| 2 | 新型高温合金热处理及长期时效过程中组织稳定性研究 | 铸造 |
| 3 | Novel casting processes for single crystal turbine blades of superalloys | Frontiers of Mechanical Engineering |
| 4 | CM247LC高温合金单晶定向凝固过程中MC碳化物对γ/γ′共晶反应的影响 | 金属学报 |
| 5 | 新型单晶高温合金WZ4的高温低周疲劳行为 | 热加工工艺 |
| 6 | Temperature evolution and grain defect formation during single crystal solidification of blade cluster | CHINA FOUNDRY |
| 7 | Parameters determination of grain microstructure prediction for a single crystal casting simulation and its experimental validation | International Journal of Metalcasting |
| 8 | 粉末高温合金FGH97疲劳裂纹扩展行为 | 稀有金属材料与工程 |
| 9 | 氩气雾化制粉FGH97高温合金组织和性能研究 | 稀有金属材料与工程 |
| 10 | 制粉方式对FGH97合金组织和低周疲劳性能的影响 | 稀有金属 |
| 11 | 高温合金单晶铸造中凝固条件的时空变化及对杂晶缺陷的影响 | 铸造 |
| 12 | Investigation on the single crystal castability and undercoolability of PWA1483 superalloy | Advanced Engineering Materials |
| 13 | 热诱导孔洞对FGH97高温合金性能的影响 | 失效分析与预防 |
| 14 | 基于ProCAST的熔模铸造模壳预热工艺过程分析及实验验证 | 热加工工艺 |
| 15 | 发动机涡轮叶片熔模铸造型壳温度场测量研究 | 特种铸造及有色合金 |
| 16 | 夹杂物尺寸及分布对FGH97高温合金低周疲劳性能的影响 | 稀有金属材料与工程 |
| 17 | 几种镍基高温合金的过冷能力和单晶可铸性的研究与比较 | 铸造 |
| 18 | 高温合金单晶叶片铸件中的宏观晶体缺陷 | 第十四届中国高温合金年会 |
| 19 | 高温合金单晶铸件中杂晶缺陷的试验研究 | 铸造 |
| 20 | 高温合金单晶铸件中条纹晶缺陷的试验研究 | 铸造 |
| 21 | 高温合金单晶叶片铸件中的碎臂晶缺陷 | 铸造 |
| 22 | 高温合金单晶铸件中的杂乱共晶缺陷 | 铸造 |
| 23 | 热处理冷速对FGH97盘件显微组织和蠕变性能的影响 | 稀有金属材料与工程 |
| 24 | FGH97高温合金不同控制模式低周疲劳性能研究 | 稀有金属材料与工程 |
| 25 | 应用于粉末冶金的修正Drucker-Prager/Cap模型 | 稀有金属材料与工程 |
| 26 | 高温合金单晶铸件中条纹晶的形成机制 | 金属学报 |
| 27 | Single Crystal Castability and Undercoolability of PWA1483 Superalloy | Acta Metallurgica Sinica (English Letters) |
| 28 | 陶瓷型芯对镍基单晶高温合金中雀斑形成的影响 | 第十四届中国高温合金年会论文集 |
| 29 | The effect of Outgas behavior of a Ni based superalloy metal powder | Powder Metallurgy |
| 30 | Hot deformation induced microstructure evolution of a novel as-extruded Ni-based PM superalloy | Materials Science |
| 31 | 定向凝固高温合金组织演变对持久性能的影响 | 稀有金属材料与工程 |
| 32 | 一种新型粉末高温合金的低周疲劳行为与寿命预测模型分析 | 稀有金属材料与工程 |
| 33 | Quasi-static hot deformation behavior of a novel third-generation Ni-based powder metallurgy superalloy | Materials Science |
| 34 | 一种第3代单晶高温合金固溶热处理组织研究 | 稀有金属材料与工程 |
| 35 | 退火预处理对高温合金单晶铸件再结晶的影响 | 铸造 |
| 36 | 一种新型第三代单晶高温合金WZ30组织与性能的研究 | 稀有金属材料与工程 |
| 37 | 单晶高温合金中条纹晶缺陷形成原因研究 | 铸造技术 |
| 38 | 氩气雾化制粉 FGH4097高温合金低周疲劳性能研究 | 稀有金属 |
| 39 | 一种新型镍基粉末高温合金不同状态热变形行为研究 | 稀有金属材料与工程 |
| 40 | Effect of nonuniform sintering on mechanical and thermal properties of silica-based ceramic cores | CHINA FOUNDRY |
| 41 | Properties of alumina coatings prepared on silica-based ceramic substrate by plasma spraying and sol-gel dipping methods | Ceramics International |
| 42 | 金属增材制造的研究进展 | 中国建材科技 |
| 43 | 一种三代镍基粉末高温合金热挤压数值模拟及验证 | 中国机械工程学会 |
| 44 | 新型第三代镍基粉末高温合金的热变形行为及其本构方程 | 中国机械工程学会 |
| 45 | 单晶高温合金异形铸件中的雀斑研究 | 特种铸造机有色合金 |
| 46 | 单晶高温合金铸件中的共晶上聚现象 | 铸造 |
| 47 | 不同结构燃烧稳定器疲劳寿命分析 | 第十四届全国高温材料及强度学术会议 |
| 48 | 氩气雾化制粉FGH4097合金高压涡轮盘的组织与性能 | 热加工工艺 |
| 49 | 一种新型镍基粉末高温合金组织和力学性能研究 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 50 | 一种新型镍基粉末高温合金WZ-A3的热压缩变形行为 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 51 | 一种新型镍基粉末高温合金WZ-A3挤压工艺研究 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 52 | 高温合金籽晶材料对单晶外延生长的影响 | 中国有色金属学报 |
| 53 | 一种新型第三代镍基粉末高温合金的微观组织及其力学性能 | 稀有金属材料与工程 |
| 54 | Effect of Thermal Exposure on the Microstructure and Stress-Rupture Properties of a Directionally Solidified Superalloy | Journal of Materials Engineering and Performance |
| 55 | Experimental study on high temperature performances of silica-based ceramic core for single crystal turbine blades | Ceramics International |
| 56 | 粉末粒度对一种新型镍基粉末高温合金热变形行为的影响 | 稀有金属材料与工程 |
| 57 | 高温合金单晶铸件中条纹晶的形成机制 | 金属学报 |
| 58 | 高温合金单晶铸件中形状因素对雀斑缺陷的影响 | 稀有金属材料与工程 |
| 59 | 高温合金单晶铸件中共晶组织分布的表面效应 | 金属学报 |
| 60 | 三种单晶高温合金的形核过冷度测量及相应凝固组织研究 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 61 | Freckle Formation Affected by Geometry Features of Single Crystal Superalloy Castings | Research & Development in Material Science |
| 62 | 脉冲加热惰气熔融-红外热导法测定镍基高温合金粉末中氧和氮 | 冶金分析 |
| 63 | 晶体取向对一种单晶高温合金再结晶的影响 | 中南大学学报（自然科学版） |
| 64 | 一种新型镍基粉末高温合金的过固溶热处理研究 | 稀有金属材料与工程 |
| 65 | 一种新型第三代镍基粉末高温合金亚固溶热处理调控γ'相分布的研究 | 稀有金属材料与工程 |
| 66 | Mo和Re对含Ru新型单晶高温合金组织稳定性的影响 | 稀有金属材料与工程 |
| 67 | Microstructure evolution of an as-extruded WZ-A3 alloy during isothermal forging | Journal of materials science |
| 68 | Dendrite evolution and quantitative characterization of γ′ precipitates in a powder metallurgy Ni-based superalloy by different cooling rates | Journal of Alloys and Compounds（合金与化合物杂志） |
| 69 | Effect of Boron and Carbon on the Hot Deformation Behavior of a Novel Third Generation Nickel-Based Powder Metallurgy Superalloy WZ-A3 | Journal of Materials Engineering and Performance |
| 70 | DD5 高温合金单晶叶片振动频率的试验研究 | 航空制造技术 |
| 71 | 高温合金CMSX-4和DD419单晶铸件中共晶含量的试验研究 | 航空制造技术 |
| 72 | 一种第三代单晶高温合金铸件表面层组织研究 | 稀有金属材料与工程 |
| 73 | Investigation of microstructure evolution and properties in silica-based ceramic cores with alumina as a mineralizer | International Journal of Applied Ceramic Technology |
| 74 | 新型镍基粉末高温合金包覆挤压数值模拟与工艺窗口优化 | 中国有色金属学报 |
| 75 | Understanding on processing temperature- metallographic microstructure-tensile property relationships of third-generation nickel-based superalloy WZ-A3 prepared by hot isostatic pressing | Journal of Alloys and Compounds |
| 76 | Effect of extrusion ratios on microstructure evolution and strengthening mechanisms of a novel PM nickel-based superalloy | Materials Science & Engineering |
| 77 | 喷丸强度对FGH4113A高温合金微观组织的影响及定量表征 | 《稀有金属材料与工程》、《Rare Metal Materials and Engineering》 |
| 78 | 铣削参数对镍基高温合金FGH4113A加工表面完整性的影响 | 机械工程材料 |
| 79 | 一种新型镍基粉末高温合金等温热压缩过程中的超塑性变形行为研究 | 稀有金属材料与工程 |
| 80 | FGH4113A (WZ-A3）粉末高温合金长期组织稳定性研究 | 稀有金属材料与工程 |
| 81 | Comparative Investigation of the Undercooling Capacity and Single Crystal Castability of Some Ni-based Superalloys | Crystals |
| 82 | Spheroidization and dynamic recrystallization mechanisms of a novel HIPed P/M superalloy during hot deformation | Journal of Alloys and Compounds（合金与化合物杂志） |
| 83 | Comparative Study of Prior Particle Boundaries and Their Influence on Grain Growth during Solution Treatment in a Novel Nickel-Based Powder Metallurgy Superalloy with/without Hot Extrusion | metals |
| 84 | Size-dependent microstructure evolution and formation mechanisms during the gas atomization process of FGH4113A Ni-based superalloy powder | Vacuum |
| 85 | Influence of shot peening on the microstructure and high-temperature tensile properties of a powder metallurgy Ni-based superalloy | Journal of materials science |
| 86 | 变形参数对FGH4113A粉末高温合金微观组织演化的影响 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 87 | Effect of heat treatments on the microstructure and mechanical properties of René 104 superalloy manufactured by selective laser melting | Materials Characterization |
| 88 | Experimental Observation on the Upward Accumulation of Eutectic in Single Crystal Superalloy Castings | Crimson Publishers |
| 89 | FGH4113A合金的双性能热处理组织与力学性能研究 | 稀有金属材料与工程 |
| 90 | Effect of solidification direction on microstructure and mechanical property of single crystal superalloy CMSX-4 | Materials Characterization |
| 91 | 重力对高温合金定向凝固组织的影响 | 金属学报 |
| 92 | 单晶高温合金CMSX-4铸件再结晶研究 | 材料工程 |
| 93 | 单晶高温合金DD419籽晶引晶过程中杂晶形成机制研究 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 94 | 不同晶粒尺寸FGH96合金热处理冷速研究 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 95 | 新型镍基粉末高温合金的微观组织和力学性能 | 粉末冶金技术 |
| 96 | 镍基单晶高温合金中的准雀斑现象研究 | 第十五届中国高温合金年会论文集 |
| 97 | 高温合金单晶铸件中的共晶上聚现象研究 | 第十五届中国高温合金年会论文集 |
| 98 | 凝固条件对高温合金单晶铸件再结晶的影响 | 第十五届中国高温合金年会论文集 |
| 99 | 高温合金导向叶片定向与单晶铸造技术及其缺陷控制 | 第十五届中国高温合金年会论文集 |
| 100 | FGH4113A粉末合金双性能盘的组织与力学性能 | 第十五届中国高温合金年会论文集 |
| 101 | 超细晶挤压态FGH4113A高温合金等温锻造过程中的本构特性及组织演变 | 稀有金属材料与工程、Rare Metal Materials and Engineering |
| 102 | 粉末高温合金FGH4113A疲劳断裂特性的研究 | 粉末冶金工业 |
| 103 | An Improved Grain Growth Model and Its Application in Gradient Heat Treatment of Aero-Engine Turbine Discs | Materials |
| 104 | Microstructure and Mechanical Properties of a Novel Powder Metallurgy Nickel-base Superalloy | Journal of Materials Engineering and Performance |
| 105 | Hot deformation behavior and microstructure evolution of a novel nickel based powder metallurgy superalloy | Journal of Materials Research and Technology |
| 106 | 不同镍基粉末高温合金的氧化行为研究 | 稀有金属材料与工程 |
| 107 | DD5单晶合金瞬时液相扩散焊接头组织性能研究 | 稀有金属材料与工程 |
| 108 | A COUPLED NUMERICAL SCHEME FOR SIMULATING LIQUID METAL COOLING PROCESS IN THE PRODUCTION OF SUPERALLOYS | International Journal of Metalcasting |
| 109 | 复合亚固溶热处理对一种新型镍基粉末高温合金涡轮盘锻态显微组织的影响 | 稀有金属材料与工程 |
| 110 | The Integration of ANN and FEA and Its Application to Property Prediction of Dual-Performance Turbine Disks | materials |
| 111 | An enhanced DPC model for metal powder incorporating yield strength of solid-state | Powder Technology |
| 112 | Effect of cooling rate on the Morphological changes in the secondary γ’ precipitation in FGH97 nickel-based PM superalloy | Intermetallics |
| 113 | Dynamic deformation mechanism for distinct flow behaviors in FGH4113A superalloy with high γ′ content during isothermal compression at sub-/ near-/super-solvus temperatures | Materials & Design |
| 114 | Effect of interrupted cooling on microstructural evolution and microhardness of FGH97 nickel-based PM superalloy | Materials & Design |
| 115 | Investigation of microstructural stability and tensile deformation behavior of a novel PM Ni-based superalloy during long-term thermal exposure | Materials Science & Engineering A |
| 116 | The Effect of Long-Term Aging on the Microstructure and Properties of a Novel Nickel-Based Powder Superalloy FGH4113A | Materials |
| 117 | 螺旋选晶器结构对CMSX-4高温合金单晶铸件晶向的影响 | 特种铸造及有色合金杂志社（武汉）有限公司 |
| 118 | 两种镍基单晶高温合金组织演变和再结晶行为 | 材料工程 |
| 119 | Based Single-Crystal Superalloy | Materials |
| 120 | Effect of Solidification Direction on Solidification Structures of Single Crystal Superalloy | Research & Development in Material Science |
| 121 | Effect of withdraw rate on non-uniform distribution of eutectic in Ni-based single crystal superalloy castings（抽拉速率对单晶铸件中共晶组织不均匀分布的影响） | Rare Metal Materials and Engineering |
| 122 | 第三代单晶高温合金WZ30的凝固组织研究 | 中南大学学报 |
| 123 | 镍基高温合金相关相图的高通量测定与热力学优化 | 中国有色金属学报 |
| 124 | Inconel 718合金锻造压气机盘件的残余应力及显微组织特征 | ScienceDirect |
| 125 | 模型剖分方式对钢锭凝固过程的影响 | 铸造技术 |
| 126 | 某型涡扇发动机粉末冶金篦齿盘均压孔裂纹分析 | 航空维修与工程 |
| 127 | 大型钢锭凝固模拟计算中发热剂的优化处理 | 大型铸锻件 |
| 128 | Effects of Different Atomization Method on Powder Property Microstructure and Low Cycle Fatigue Property of FGH97 Alloy | Materials Science and Engineering |
| 129 | 热等静压对激光选区熔化制备高温合金的影响 | 金属功能材料 |
| 130 | Formation and evolution of hierarchical microstructures in a Ni-based superalloy investigated by in situ high-temperature synchrotron X-ray diffraction | Journal of Alloys and Compounds |
| 131 | Machine learning-assisted constitutive modeling of a novel powder metallurgy superalloy | International Journal of Mechanical Sciences |
| 132 | 镍基单晶高温合金定向凝固雀斑形成机理研究 | 热加工工艺 |
| 133 | 一种新型镍基粉末高温合金涡轮盘的双性能热处理工艺研究 | 稀有金属材料与工程 |
| 134 | 基于响应面法的FGH4113A高温合金涡轮盘锻造工艺参数优化 | 稀有金属材料与工程 |
| 135 | Effects of Crystal Orientation and External Stress on the StaticReerystallization Behavior of an Ni-Based Single-Crystal Superalloy | Materials |
| 136 | 抽拉速率对单晶铸件中共晶组织不均匀分布的影响 | 稀有金属材料与工程 |
| 137 | Experimental Investigation on Quasi-Freckie Phenomenon inSingle-Crystal-Blade Castings of Superalloys | metals |
| 138 | The Effect of Thermal Processing on the Microstructure and Properties of a Novel Nickel-Based Powder Metallurgy Superalloy | Materials |
| 139 | 挤压态镍基粉末高温合金FGH4113A热变形行为及组织演变规律研究 | 稀有金属材料与工程 |
| 140 | Effect of Solidification Direction on the Freckle Formation inSingle-Crystal Superalloy Castings | Materials |
| 141 | Effect of high-temperature stress relief annealing on the recrystallization of predeformed Ni-based single crystal superalloy | Journal of Alloys and Compounds |
| 142 | Dendrite Structure Refinement and Mechanical Property Improvement of a Single-Crystal Superalloy | Metals |
| 143 | Influence of Hot Deformation Temperature on Grain Size and γ′Phase in U720Li Alloy After Sub-Solvus Heat Treatment | Metals |
| 144 | Creep Mechanism and Microstructure Evolution of a Directionally Solidified Ni-Based Superalloy with Different Orientations at 850℃ | Metals |
| 145 | Anisotropy in Creep Behavior of a Directionally Solidified Ni-Based Superalloy at 980℃and 1070℃ | materials |
| 146 | Anisotropy in the Creep–Fatigue Behaviors of a Directionally Solidified Ni-Based Superalloy: Damage Mechanisms and Life Assessment | Crystals |
| 147 | 工艺参数对异质高温合金惯性摩擦焊的影响 | 《新技术新工艺》 |
| 148 | Temperature dependence of tensile deformation behaviors in a novel powder metallurgy Ni-based superalloy with high density nanoscale γ′ phase | Materials Science & Engineering A |
| 149 | 数值模拟技术在高温合金中的应用 | 《铸造》 |
| 150 | 真空热处理对单晶高温合金表面组织的影响研究 | 《稀有金属材料与工程》 |